Hi there we are dealer here in Iceland selling machines and tools and if you are interested in second hand machines like
Biesse EB 70 panelsaws
Biesse edgebanders
Barberán UV line
Viet widebelt sanding machine
Biesse CNC
SCM CNC
and lot more if you are interested let us now and we can send you more information`s
Best regards
Arnar Hrólfsson

   Our company produces and sell oak and beech wood elements, pine and spruce lumber since 1995.
Our sawmill is situated in the heart of wood resource and we have a license to exploit 40 Ha of forest.
At the moment we are looking for a partner to extend, diversify our production and to conquer new markets.

Our advantages:
skilful and experienced employers
big 2Ha production area, fully equipped:
-2 production workshops (800 m²)
-2 covered areas + outdoor porch (450 m²)
-Kiln Dryers chamber (100 m²)
-Steaming chamber (50 m²)
-Saw bands
-ETC…..
We are situated in the center of wood resources
We are situated close to EU boarder - 120 km from polish boarder
We have strong market contacts
Managers of our company speak fluently English and French (Russian, Ukrainian , Polish)

Should you have any question, please do not hesitate to contact us.

We will be happy to answer for all the inquiries.

Kind regards

   We want to buy a resawing bandsaw hydraulic 1200-1300 and a multiripp saw minimum 600 mm width.

   We sell off our stock circular saw with movable table size 3200 mm Chambon-France, Spindle Moulder Carriage- Band saw and circylar saw sharpening and setting machine CMC-Italia, Multiboring machine 21 axes, ME.SA-San Marino, Panel saw with useful cutting height of 90 mm, Macmazza-Italia, Edge-banding machine Turanlar-Turcia, Mini timber drying kiln -open with winging main door and inverter, front type loading with forklift for hardwood and softwood, Incoplan-Italia.

   We sell unedged birch and black alder boards.
Measurements: thickness 32 mm (35 mm) and 50 mm (54mm), other thicknesses possible as well.
Length 3.0 m +0.1 m.
Width: saw kerf min 10 cm.
Tolerance: 0+3 mm.
Quality:

Side A: without knots, heartwood and other defects. One knot with the reduction is allowed for the central board.

Side B – single knots with diameter up to 30 mm are allowed or 2 knots in 1 meter. Heartwood (for up to 20 % of boards) is allowed up to 1/3 of board thickness and width. Not less then 12 cm of wood without defects must leave in both sides of heartwood.
Side C – no restrictions for knots and heartwood.

Boards must be clean from sawdust, sands, etc. Not allowed: uneven cutting, fungus or insect damages, change of colour, marks of storage.


Measurement and packaging. The narrow part of the board between the bark s measured. The measurement is clearly written. The defects are reduced during the measurement. Packaging is done according the length with the stacking strips in every 80 cm in the row. The measurement report is included for every package. Packages are suitable for unloading with loader. They are strongly bound with plastic or metallic band.

Also we could provide oak boards of various dimensions.

We buy forests in Lithuania, produce unedge boards and sell for eastern europian prices.

   Good day, Sir / Madam

We were formed in 1967 and from the beginning focused its activities on the pallet machinery sector. Due to the market demands, CAPE developed their equipment and became one of the most important companies worldwide.
CAPE is a private family company with loyal and hard working team of employees and our wide programme of pallet machinery has been exported to more than 30 countries.

We would like to offer you Automatic Pallet Assembly line ( for Euro, CP pallets and for special pallets according your`s enquiry ) , let you can produce pallets more faster and effective! As well as at this moment we have one more possibility for a second hand CAPE Line( 2001 )- 8 YEARS OLD. The line is a full line with all modules.
Average shift( 8 hours ) capacity 2000 pallets, with 3 operators!!!

To CAPE lines, machines we propose guarantee service/ after sales service and necessary spare-parts!

As well as we have full range pallet machines- block saws, special freses for pallet boards, pallet stamps machines, band saw table for pallet dismantle,repair etc.

Please visit our web site for more information
SEE PRODUCT : PALLETS


I look forward to hearing from You

   Training for headsaw, bandsaw driving operations
performances improvements; setworks efficienty uses.
Equipment controls and corrections.
Sharpening operations

   Dear Sirs,

We an import-export company from Canada we we want to buy the following :

1.
Commodity: Square edged Saw Timbers
Species: Pine (white), Spruce
Humidity: fresh
Thickness:25,50, 63, 75 mm
Width: 100,125,150,180,200 mm
Length: 6000 mm
Quantity: At beginning 500 cbm in month and more
Quality:less amount of knots without sap-wood
Payment: L/C or border custom
Sample:One 20 foot container
Port : BandarAbbas port on Persian Gulf from Iran


2.
Commodity: Square edged Saw Timbers
Species: Pine (white),Spruce,fir
Humidity: fresh
Thickness:25mm
Width: 200,250 mm
Length: minimum 1000 mm
Quantity: At beginning 500 cbm in month and more
Quality:for make packing case
Payment: L/C or border custom
Sample:One 20 foot container
Port : BandarAbbas port on Persian Gulf from Iran

And also We need logs for Particleboard/chipboard factory.


If you are interested please send your best price offer for above items



Regards

   A small wood processing factory for sale: building 430 sq.m. which 280 sq.m. equiped with wood processing machines;
4000 sq.m. afferent ground.

Facilities:
- heating facility on sawdust with automating loading;
- 130 KVA electric transformer;
- private water source;
- general exhaust system with 50 m3 silo and briquette press
The factory has all the necessary licenses including the environmental protection license.

Machines:
Moulding machine Paoloni MASTER2004S ( five shifts);
Circular saws;
Band saw diam. 800 mm;
Surface planers;
Two shift copy milling machine;
Two shift copy milling machine with round table diam. 1000 mm;
And some machines for wood barrel production (cooperage).

Location:
Serbia, a 10 km. from Kruševac ( 200 km. from Belgrade)

There is option to sell only objects and land without machines.

For any additional information pleas do not hesitate to contact me

   We are a Slovakian producer and seller of beech finger jointed panels. For our production we are importing beech elements of this dimension specification.

We would like you to send us your price offer

Beech sawn wood fresh (humidity 60%) or dry (humidity 6% +- 2%), steamed or unsteamed
Parameters: invoiced
25x50x250 - 500 mm
600 - 1500 mm
38x50x250 - 500
600 - 1500
50x50x250 - 500
600 - 1500

Cuted
29/30x56x270 - 520 mm
620 - 1530 mm
43x56x270 - 520 mm
43x56x270 - 520 mm
620 - 1530 mm
56x56x270 - 520 mm
620 - 1530 mm
Proportional share of 250 mm length should be max. 10% of supplied volume
Addition on length 20mm. Upper 1000mm addition 30mm.

Quality: I. and II. class. European standards
Percentage o I. cl. apr. 70% II. cl. apr. 30%
Packing requirements - different dimensions packed separately on the pallets 80x120cm on the spruce interlayer secured with PET band.
We hope for your early reply and future cooperation

   Dear Sirs,

Here is some information about our company:

We are the largest and most modern Croatian sawmill. With an annual capacity of 90.000 m3 of logs (60.000 m3 firr/spruce, 25.000 m3 of beech and 5.000 of oak).
Our sawmill consists of log debarking and sorting line, 2 bandsaw linws, 2 frame lines, 9 MW of installed therma power, 1.300 m3 of drying kilns. In addition to sawn, dried and planned timber we offer laminated glue beams and wood pellets. 100 years old tradition makes us your ideal partner."


As you see above, we are producer of laminated beams. We suppose that this kind of product is important to your bussiness. Fast on site construction, great visual appearance, technical precision, high quality are only one of advantages of our BSH laminated beams which makes this product even more attractive.
We hope that this first contact will result with long term cooperation of mutually interest.

Looking forward to your reply, we remain,

Yours sincerely

   Dear Sirs,

We are resellers of NEW, USED AND RECONDITIONED woodworking machinery present on the international markets from over 50 years.

We are qualified in machines for panel working such as: edge-banders, boring machines, sanding and calibrating machines, presses and pressing lines, panel saws, moulding machines, double-end-tenoners, combination edge bander-tenoner, automations etc.

But you can also find a vast range of common and traditional machines like: surface planers, thickness planers, spindle moulders, saws (circular, multiblade, band ones) and others.

For a real time updating check our INTERNET web site. WWW.BREMAC.COM

where you can find all the machines available in our stock and relative pictures.

Pls. do not hesitate to contact us for any further information that you may require and for any type of request; and if we do not have it in stock, we can get it.

Best regards,
Paolo Brescancin

   The company DANTO CONSTRUCT S.R.L., created in 1994, dealing in the field of forest exploitation and wood processing, privately owned by a single shareholder, located in Tazlau, Neamt County, Romania, is holding the following assets:

A. THE TIMBER AND WOODEN PRODUCTS FACTORY

The factory spreads out on a surface of 134.000 m2 and consists in the following main units:

1. SAW MILL HALL, sized 50 m x 80 m, is the building where the logs are cut and it is equipped with the following machines:
a)LOG CUTTING MACHINE MODEL SIC 1600 PRIMULTINI Italy, year 2007, roller diameter 1600 mm, with ribbon blade, output 80 m3 per shift for hardwood (beech, oak, maple) or 100 m3 per shift for softwood (fir, spruce);
b) Hydraulic cartridge model CFI with 4 fixed grapping devices, PRIMULTINI Italy, year 2007, allows processing logs up to 8 m long;
c) Control panel PRIMULTINI, servo-drive electric centre, multifunctional manipulators;
d) Automation and mechanization line with mechanic discharge table, with helical rolls, motored table with strip rolls, system of collecting planks by sliding;
e) PENDULUM SAW LINE WITH EDGING MACHINE, MODEL KME 2 /750 PAUL, with one fixed blade and two mobile blades, 3 lasers for hardwood, Germany, year 2007
f) Preliminary circular saw (before edging), model STROMAB, Italy, year 2007;
g) CIRCULAR PENDULUM SAW, model STROMAB, Italy, production year 2007;
h) Multiple blades circular splitting saw with 1 shaft for softwood, production CML Ital, drive power 44 kW, approximate weight 10.000 kg, production year 2007.
i) Electronic sharpening machine for stellited blades, production ISELI, Italy, year 2007;
j) vertical saw mill, opening 1000 mm, made in BRNO Czechoslovakia, for cutting prismatic logs, cutting capacity 70 m3 per shift;
k) Vertical saw mill with the same characteristics, that takes over the prism cut by the first saw mill. These saw mills work in tandem.

2. MASSIVE WOOD PANELS HALL
Dimensions: 200 metres in length, 30 metres in width.
Production of massive hardwood and softwood panels for furniture, floor parquetry, wainscot, semi-finished products with the following machines:
a) Multiple blades circular saw with 8(eight) blades - manufactured in Germany in 2002;
b) 4 (four) pendulum type saws Hollyteck trade, manufactured in 2002;
c) Circular table for sorting elements;
d) Semi-automatic machine for finger jointing, DIMTER, Germany, length 6 m, year 2002;
e) Cold press 6000 mm x 1000 mm;
f) Hot press with diathermic oil 3000 mm x 1300 mm;
g) 4 sides processing machine Weinig, Germany;
h) Panel forming machine, production 2000;
i) Wood surfaces rectifier, production 2000;
j) Multiple boring machine with 27 ends, production 2004;
k) Packing machine (polyethylene wrapping).

3. BANDZIG HALL
Sizes 45 m x 35 m, with 2 production lines for thin timber

4. HALL FOR BEAMS FOR HOUSES
Sizes 38 m x 25 m

5. FINISHED PRODUCTS HALL
Sizes 30 m x 25 m

6. KILN DRYERS FOR WOOD, COPCAL TYPE
Production 2000, Italy, drying capacity 300 m3 per charge, computer assisted with drying programs for softwood, beech, oak, maple, cherry, etc.

7. WOOD STEAMING CHAMBER DE NARDI
Production 2007, Italy, capacity 32 m3 per charge, computer assisted, made of aluminium profiles.

8. THERMAL POWER STATION
Composed by 3 boilers of 1.600.000 kcal each, supplies the steaming chamber and the heating system. Fuels used: saw dust and splinters.

9. MECHANICAL WORKSHOP
Metal processing machines for all kinds of repairs in the factory.

10. ELECTRIC TRANSFORMERS
2 transformers of 600 kWh each.

11. GUARD AND FIRE FIGHTING
Includes the authorized fire fighting team, fire truck, the fire ring pipe surrounding the factory, hydrants, 3 water basins, 500 m3 each.

12. BLOCKS OF FLATS
For the working staff in the factory, there are 2 blocks of flats, with a total surface of 1000 m2.

13. HIGHLY TRAINED PERSONNEL, ENVIRONMENT PERMIT, FOREST EXPLOITATION CERTIFICATE

B. THE FOREST EXPLOITATION

For supplying the factory with wood (logs), the company owns a forest exploitation certificate for 40,000 cm/year. Based on this certificate the company participates in the auctions organized by the Regional Forest Directorate from which we buy parcels of forest for the working forestry. As a matter of fact, in the area where the factory is located, the competition doesn`t exist. The area of forest from where we can buy wood mass is approximately 26,000 hectars. The species of wood which can be worked out are: fir, spruce, beech, sycamore maple tree, oak, cherry tree, and so on.
For the working forest activity of these plots of land, the company is equipped with the following: - 8 (eight) forest trucks with which it can be pull out from the forest to the automotive road 400-500 cm for each forest truck/month. All the forest trucks are made in Romania adapted for the work conditions from here, manufactured at Truck Factory from Reghin between 199-2004. - 6 (six) mechanical saws, STILL and HUSQVARNA trade with which can be chopped approx 3000-4000 cm or trees/month, bought in the same period-1999-2004-all in good way of working. With these saws work 6(six) teams of workers - 4-6 workers/each team. These teams throw down the trees in the forest, cut the branches and, in this way, result the logs for the saw mill.
All this activity is coordinated by 2(two) experts with seniority of 25-30 years in this field and with specialization in this field.

All the personnel is qualified and with seniority in this field of many years.
For the fitting out of the roads in the plots of land, there are 2(two) bulldozer - S650 Romanian trade - in good way of working, manufactured in 1996 and 1994 which dig up roads for the forest truck.
The transportation of the logs from the worked plot of land to the factory is made with 4(four) trailers for logs transportation. Each trailer can bring 20 cm (cubic meter) at each ride. The distance of transportation is 7(seven) km up to 15(fifteen) km that represents a very big advantage because of the very fast intervention in case of damages of the plants which work in the forest and of the easy transportation of the workers until the work place. Another advantage is the fact that the other factories from the area are situated at a distance of 50 km up to 100 km from us which makes the transportation very expensive for they.
This is the reason for which we do not have a competition in this area. All the machines are drived by professionals drivers who know to work very hard conditions like in summer and autumn. The wage of a driver is about 200 - 300 USD/month, depending on the quantity of logs transported. The cars are manufactured between 1996-2000 in good way of working.
The transported wood from the forest arrives in a warehouse of logs endowed with a crane which unloads the trailers. The unloaded logs are truncated at a length of 4 m with 2(two) mechanical saws ant then are picked on diameters and stored in the logs store.
The manipulation of the logs in this store is made with 2(two) frontal loaders of Romanian manufacture with a raising capacity of 5(five) tones, completed auto overhauled, year of manufacture 1994-1996.
In this warehouse the logs are picked for saw mill , for fire wood and other utilisations. An horizontal sawmill chops the logs with the diameter between 1000 mm and 1500 mm,
Also, here there is a slitting plant of the fire wood for its transportation in smaller pieces for fire.

   Dear Sirs,

We are resellers of NEW, USED AND RECONDITIONED woodworking machinery present on the international markets from over 50 years.

We are qualified in machines for panel working such as: edge-banders, boring machines, sanding and calibrating machines, presses and pressing lines, panel saws, moulding machines, double-end-tenoners, combination edge bander-tenoner, automations etc.

But you can also find a vast range of common and traditional machines like: surface planers, thickness planers, spindle moulders, saws (circular, multiblade, band ones) and others.

For a real time updating check our INTERNET web site. WWW.BREMAC.COM

where you can find all the machines available in our stock and relative pictures.

Pls. do not hesitate to contact us for any further information that you may require and for any type of request; and if we do not have it in stock, we can get it.

Best regards,
Paolo Brescancin

   Dear Sirs,

We are resellers of NEW, USED AND RECONDITIONED woodworking machinery present on the international markets from over 50 years.

We are qualified in machines for panel working such as: edge-banders, boring machines, sanding and calibrating machines, presses and pressing lines, panel saws, moulding machines, double-end-tenoners, combination edge bander-tenoner, automations etc.

But you can also find a vast range of common and traditional machines like: surface planers, thickness planers, spindle moulders, saws (circular, multiblade, band ones) and others.

For a real time updating check our INTERNET web site. WWW.BREMAC.COM

where you can find all the machines available in our stock and relative pictures.

Pls. do not hesitate to contact us for any further information that you may require and for any type of request; and if we do not have it in stock, we can get it.

Best regards,
Paolo Brescancin